The FLO-CORP FloSentry 3™ flow switch provides single- or dual-alarm control and is compatible with all MEMFlo VA Flow Meters. The ideal solution for liquid, gas, and steam applications, from chemical processing to wastewater treatment.
Part Number: MFFS3
Replaces Part Number: MFFS2-01, MFFS2-02, MFFS2-51, MFFS2-52
Compatible with all MEMFlo flow meters, FloSentry 3™ flow switch is a great choice for a variety of single or dual alarm applications. FloSentry 3™ provides a high/low or high and low level switch with a dry contact relay output and is DC powered. This alarm system can be added to most MEMFlo flow devices to provide intelligent process automation as well as safety capabilities. The red LED alert light brings immediate attention to process conditions. Typical applications include process lube oil flow, gas flows, biodiesel fuel manufacturing, chemical processing, biomedical, coolant system, water and wastewater treatment facilities.
Easy Operation: No push buttons or special scaling required
Maximized Performance: Single- or dual-alarm or switch point
Easy Installation: Slides over all MEMFlo Flow Meter sight tubes
Maintenance-Free: Transmitter electronics completely isolated from process
Maximum Accuracy: Specifically calibrated for customer’s application
Warranty: Five-year warranty available
Switching Type: Relay for connection to contact inputs of a PLC or audible or visual alarm, solenoid valve or any device using a Form C – Dry Contact
Single or Dual Relay Option: N.O. or N.C. 10 amp rated Form C
Supply Voltage: 10 – 31 VDC
Load Current Max: 250 mA
Voltage Drop: Protection Class: NEMA 4X or NEMA 7 Cl 1, Div 1 IP66/67
Liquid & Gas
Chemical & Petrochemical, Environmental Water & Wastewater, Iron, Steel & Metal, Oil & Gas, Original Equipment Manufacturers, Pulp & Paper, Renewable Energy
|Replaces Part Number||
MFFS2-01, MFFS2-02, MFFS2-51, MFFS2-52
The UltraFlo™ UFD3 ultrasonic flow meter is a fixed or portable, clamp-on flow meter that is easy to install, accurate, and simple to use. The UltraFlo™ UFD3 ultrasonic flow meter is widely used in applications such as oil and gas, water treatment, pure water, chemical, and much more.Part Number: UFD3 Replaces Part Number: UFDD
The CALFLO™ CFSG3 flow and temperature thermal mass flow switch is a highly precise, compact industrial instrument. The CFSG3 works according to the calorimetric principle which is evaluated by using microprocessor technology.Part Number: CFSG3 Replaces Part Number: CFSG
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.