The FLO-CORP CalFlo™ CFSG Flow and Temperature Thermal Mass Switch protects equipment and process from high temperatures and no-flow conditions. Precision monitoring for liquid applications, from deionized water to dry pump protection.
Offered in general purpose and hazardous proof configurations, this compact flow switch is a great choice for monitoring a diverse range of liquid applications. The CalFlo™ CFSG will monitor flow and temperature to protect equipment and process from high temperatures and no-flow conditions. The CFSG has NO moving parts and is a reliable alternative to failure prone mechanical flow switches. The short sensor is intended for use in pipe sizes ½” to 1 ½” in diameter and the long sensor is recommended for pipe sizes 2” and up.
Durable: Repeatable switch point for maximum protection for rotating equipment
Saves Money: Low cost of ownership
Low Maintenance: No moving parts to replace
Warranty: Five-year warranty available
Service: Compatible Liquids Flow Set Point: 1.2 fps (.4 mps) (water related) Response Time: < 30 seconds Sensor Rating: CFSG-1: NEMA 6 (IP67) CFSG-2: NEMA 7
Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Life Sciences, Minerals & Mining, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products
The FLO-CORP CalFlo™ CFNF2 DC Thermal Mass Air Flow Switch uses an adjustable set-point from 3 to 32 feet per second and LED indicator. Precision monitoring for gas applications, from air filtering to energy conservation systems.
The FLO-CORP CalFlo™ CFVF Thermal Mass Liquid Flow Meter has an adjustable measuring range, LED indication of flow, and is well suited for pipes up to 16” in diameter. The ideal solution for liquid applications, from sulfuric acid to potable water.
The FLO-CORP CalFlo™ CFHM Low Flow Thermal Mass Liquid Flow Meter is field adjustable and provides a 4-20mA output for flow rate. The ideal solution for low-flow liquid applications, from chemical dosing to food and beverage processing.
The FLO-CORP PDFlo™ PDTX4 Four Wire Digital Display Flow Transmitter is a 4-20mA rate output, remote indication and monitoring device compatible with all PDFlo Flow Meters. The ideal measurement solution for liquid applications, from epoxy paints to brake fluid.
The FLO-CORP MAGFLO™ MMFM Magnetic Flow Meter is resistant to harsh chemicals and is available in flanged and wafer style. The ideal measurement solution for liquid applications, from waste treatment to pulp and paper.
The FLO-CORP CalFlo™ CFAF Thermal Mass Gas Flow Meter provides a wide measurement range up to 164 fps and is available in five different units to ensure the best signal resolution. The ideal solution for gas applications, from air conditioning to energy conservation systems.
Driver License Terms
The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software.
Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail).
The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT.
It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI.
The Software is provided "as is''.
There are no warranties (or similar) in relation to the quality of the Software.
There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data.
There is a monetary cap on FTDI's liability.
If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.