The FLO-CORP CalFlo™ CFNF2 DC Thermal Mass Air Flow Switch uses an adjustable set-point from 3 to 32 feet per second and LED indicator. Precision monitoring for gas applications, from air filtering to energy conservation systems.
This industrial purpose flow switch is a great choice for monitoring a variety of air or gaseous applications. The CalFlo™ CFNF2 features solid-state switching and is extremely reliable even under the harshest environmental conditions. NitroFlo features a repeatable alarm, an adjustable set-point from 3 to 32 feet per second, and LED indication of flow. The short housing is intended for use in pipe sizes 1/2” to 1-1/2” in diameter and the long housing is recommended for pipe sizes 2” and up. Typical applications include air conditioning, ventilation, air filter monitoring, extraction fans, blowers, damper regulators and energy conservation systems.
Durable: Repeatable switch point for maximum protection for rotating equipment
Saves Money: Low cost of ownership
Low Maintenance: No moving parts to replace
Warranty: Five-year warranty available
Pressure: CFNF2-U: 15 psi (1 bar) CFNF2-S: 150 psi (10 bar) Switching Range: 3 to 32 fps (1 to 10 mps) Temperature Drift: <0.5% / K </0>Switching Current: 500 mA max
Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Life Sciences, Minerals & Mining, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products
The FLO-CORP CalFlo™ CFVF Thermal Mass Liquid Flow Meter has an adjustable measuring range, LED indication of flow, and is well suited for pipes up to 16” in diameter. The ideal solution for liquid applications, from sulfuric acid to potable water.
The FLO-CORP PDFlo™ PDSG1 Positive Displacement Flow Meter can maintain consistent accuracy despite changing viscosity. The ideal solution for liquid applications, from hydraulic testing to fuel measurement.
The FLO-CORP PDFlo™ PDFOP Fiber Optic sensors are designed to transmit a safe fiber optic signal, allowing the incorporation of PDFlo Flow Meters into fully charged electrostatic systems. The ideal solution for liquid monitoring, from electrostatic paint systems to applications with noise from VFDs.
The FLO-CORP ChannelFlo™ OCRA Radar Open Channel Flow Meter uses through the air technology that does not come in contact with the flow stream. The ideal measurement solution for liquid, solid, and slurry applications, from sewers to streams.
The FLO-CORP CalFlo™ CFVF2 Thermal Mass Liquid Flow Meter is ideal for handling aggressive and hard to measure media. Precision measurement for liquid applications, from non-potable water to diluted corrosive liquids.
The FLO-CORP PDFlo™ PDTX2 Two Wire Digital Display Flow Transmitter continuously displays either flow rate or total and is compatible with all PDFlo Flow Meters. Precision measurement for liquid applications, from grease to liquid polymers.
Driver License Terms
The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software.
Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail).
The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT.
It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI.
The Software is provided "as is''.
There are no warranties (or similar) in relation to the quality of the Software.
There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data.
There is a monetary cap on FTDI's liability.
If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.