The FLO-CORP CalFlo™ CFNF1 AC Thermal Mass Air Flow Switch uses solid-state switching for extremely reliable results, even in harsh environments. Precision monitoring for gas applications, from ventilation to damper regulators.
This industrial purpose flow switch is a great choice for monitoring a variety of air or gaseous applications. The CalFlo™ CFNF1 AC Thermal Mass Air Flow Switch features solid-state switching and is extremely reliable even under the harshest environmental conditions. The CFNF1 features a repeatable alarm, an adjustable set-point from 3 to 32 feet per second, and LED indication of flow. The short housing is intended for use in pipe sizes 1/2” to 1-1/2” in diameter and the long housing is recommended for pipe sizes 2” and up. Typical applications include air conditioning, ventilation, air filter monitoring, extraction fans, blowers, damper regulators and energy conservation systems.
Durable: Repeatable switch point for maximum protection for rotating equipment
Saves Money: Low cost of ownership
Low Maintenance: No moving parts to replace
Warranty: Five-year warranty available
Pressure: CFNF1-_-U: 15 psi (1 bar) CFNF1-_-S: 150 psi (10 bar) Switching Range: 3 to 32 fps (1 to 10 mps) Voltage Tolerance: ± 10 % Switching Current: 200 mA max
Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Life Sciences, Minerals & Mining, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products
The FLO-CORP ChannelFlo™ OCRA Radar Open Channel Flow Meter uses through the air technology that does not come in contact with the flow stream. The ideal measurement solution for liquid, solid, and slurry applications, from sewers to streams.
The FLO-CORP PDFlo™ PDTX4 Four Wire Digital Display Flow Transmitter is a 4-20mA rate output, remote indication and monitoring device compatible with all PDFlo Flow Meters. The ideal measurement solution for liquid applications, from epoxy paints to brake fluid.
The FLO-CORP CalFlo™ CFVF Thermal Mass Liquid Flow Meter has an adjustable measuring range, LED indication of flow, and is well suited for pipes up to 16” in diameter. The ideal solution for liquid applications, from sulfuric acid to potable water.
The FLO-CORP CalFlo™ CFAF Thermal Mass Gas Flow Meter provides a wide measurement range up to 164 fps and is available in five different units to ensure the best signal resolution. The ideal solution for gas applications, from air conditioning to energy conservation systems.
The FLO-CORP CalFlo™ CFVF2 Thermal Mass Liquid Flow Meter is ideal for handling aggressive and hard to measure media. Precision measurement for liquid applications, from non-potable water to diluted corrosive liquids.
The FLO-CORP AccuTank™ Radar Level Monitoring System uses time domain reflectometry (TDR) for remote access to real-time data. The ideal solution for liquid or solid applications, from lift stations to mobile tank trucks.
The FLO-CORP CalFlo™ CFNF2 DC Thermal Mass Air Flow Switch uses an adjustable set-point from 3 to 32 feet per second and LED indicator. Precision monitoring for gas applications, from air filtering to energy conservation systems.
The FLO-CORP CorFlo™ CMFM Coriolis Mass Flow Meter delivers accurate measurement for virtually any process fluid, while exhibiting exceptionally low pressure drop. The ideal solution for liquid and gas applications, from latex to laughing gas.
Driver License Terms
The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software.
Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail).
The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT.
It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI.
The Software is provided "as is''.
There are no warranties (or similar) in relation to the quality of the Software.
There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data.
There is a monetary cap on FTDI's liability.
If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.