The FLO-CORP Tracer 1000™ LTT1 Guided Wave Radar Level Transmitter with 1 analog output and 2 switches. It has few installation restrictions, and it measures precisely even with difficult tank geometries or close interfering structures. The ideal solution for anything from stilling wells to food and beverage.
Featuring TDR (Time Domain Reflectometry) technology, the Tracer 1000™ provides continuous level measurement and point level detection in liquids and solids, with analog and switching output. This innovative device has almost no installation restrictions – it can be mounted in small tanks, tall and narrow nozzles and it measures precisely even with difficult tank geometries or close to interfering structures. Factory settings may be configured via HART® Communication protocol. Tracer 1000 is ideal for various types of processing and storage applications and has an exceptional performance in liquids with low reflectivity such as oils and hydrocarbons.
Reliable Measurement: High-frequency radar impulses
Easy Operation: Auto-calibration to any dielectric
Maximum Accuracy: Specifically calibrated for customer’s application
Enhanced Safety: Overflow prevention from programmable fail safe mode
Highly Adaptable: Changes in viscosity, density, or acidity do not effect accuracy. Boiling surfaces, dust, foam, vapor do not effect device performance
Warranty: Five-year warranty available
Range: 0″ – 780″
Measurement: Liquids, Slurries, Solids
Accuracy: ± 0.12″
Process Mount: 3/4″ NPT
Certification Standard: NEMA 6 (IP66/ IP68) General Purpose
Optional: ATEX, Explosion Proof, Zone 1
Liquids & Solids
Aerospace, Agriculture, Government Agencies, Iron, Steel & Metal, Life Sciences, Minerals & Mining, Original Equipment Manufacturers, Power & Energy, Pulp & Paper, Refined Products, Renewable Energy
The FLO-CORP Ranger Two™ LTRP-2 Ultrasonic Level Transmitter (measurement up to 30ft.) is designed for level and distance measurement in remote monitoring and other difficult outdoor applications. Features include a stainless steel housing for rugged indoor or outdoor use, surge protection, and the ability to connect to one sensor up to 32 sensors optimized with RS-485 output to the CONNEX 3D Cellular Monitor.
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.