The FLO-CORP Ranger Elite™ LTRE Ultrasonic Level Transmitter features a short 8” dead band and up to 40 feet measurement range. The ideal solution for liquid applications, from pump stations to chemical storage.
The Ranger Elite™ Ultrasonic Level Transmitter provides accurate non-contacting level measurement up to 480” (12m) and features Two-Wire Loop-Powered 4-20 mA Analog Output. The adaptive signal and automatic echo detection & control provides effortless and accurate level measurements in one non-contacting transmitter. The 2” NPT mount on the transducer makes mounting into a standard tank nozzle or fitting easy and affordable. The operator interface uses a 4 line graphic display that allows for easy level indication and configuration. The push buttons on the front face are easy to navigate even without using a programming manual. Plus, the HART communications output talks directly to the standard FLO-CORP Tracer Talker™ Software to configure, monitor and data log your application. Download the free FLO-CORP Tracer Talker software and purchase one communication tool.
Maximum Accuracy: Specifically calibrated for customer’s application
Easily Programmable: Uses LCD display and push buttons
Reliable: Non-contacting sensor for trouble-free operation
Saves Money: Low cost of ownership
Simple Diagnostics: Uses advanced HART communication
Warranty: Five-year warranty available
Range: 8 – 480″ (203mm – 12m)
Accuracy: ± 0.25% of maximum range
Process Connection: 2″ NPT
Aerospace, Agriculture, Government Agencies, Iron, Steel & Metal, Life Sciences, Minerals & Mining, Original Equipment Manufacturers, Power & Energy, Pulp & Paper, Refined Products, Renewable Energy
The FLO-CORP Ranger Two™ LTRP-2 Ultrasonic Level Transmitter (measurement up to 30ft.) is designed for level and distance measurement in remote monitoring and other difficult outdoor applications. Features include a stainless steel housing for rugged indoor or outdoor use, surge protection, and the ability to connect to one sensor up to 32 sensors optimized with RS-485 output to the CONNEX 3D Cellular Monitor.
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.