**DISCONTINUED** replacement is: CONNEX 3D™ Flexible Process Monitor
The FLO-CORP DigaCom 2000™ DCX2 Digital Process Meter is a field mount display that is ideal for a range of flow and level applications, from monitoring corn fields to fracking operations.
Part Number: DCX2
DigaCom 2000™ Universal Process Display is a field mount display that provides bright, 6-digit LED indication, internal DC power supply for transmitter power, isolated scalable 4-20mA output and advanced communications. DigaCom features digital push button configuration, simple programming interface and Ethernet communication. This device is well suited for a variety of process applications. Typical applications include level monitoring, analytical measurements, flow, distance monitoring, pressure monitoring, weight/volume monitoring and temperature monitoring.
User Friendly: 6-digit bright LED indication display
Easy Operation: Programmable through push-button configuration or DigaLink Software
Convenient Remote Monitoring: Access the application from your computer with DigaLink Software
Highly Adaptable: Accepts any standard analog input
Warranty: Five-year warranty available
Display: 6-digit, Red LED
Analog Input: 4-20 mA current loop
Analog Output: Isolated, scalable 4-20 mA
Enclosure: NEMA 4X (IP65) [standard], NEMA 7 Explosion Proof [optional], or Epoxy Coated Aluminum [optional]
Communication: Serial Port: RS-485, Screw Terminal; Ethernet Port: 10/100 Base-T (RJ-45)
MFAM Volumetric VA Flow Meter // MFTV Volumetric VA Flow Meter // MFVC Volumetric VA Flow Meter // MFHM Volumetric VA High Pressure Flow Meter // LTT1 Guided Wave Radar Level Transmitter // LTT1-2G 2nd Generation Radar Level Transmitter // LTTA Non-Contact Radar Level Transmitter // LTRP Ultrasonic Level Transmitter // LTRE Ultrasonic Level Transmitter
Local and/or Remote
Aerospace, Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Food & Beverage, Government Agencies, Iron, Steel & Metal, Life Sciences, Minerals & Mining, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Pulp & Paper, Refined Products, Renewable Energy
The Relay and Pump Control Module for the CONNEX 3D™ Flexible Process Meter features a relay setpoint for rate or total capabilities.
The Radio Module for CONNEX 3D™ Flexible Process Meter is a wireless I/O monitoring solution solving vast numbers of industrial automation challenges using point-to-point radio communications.
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.