Product Information
The FLO-CORP PDFlo™ PDTX4 Four Wire Digital Display Flow Transmitter is a 4-20mA rate output, remote indication and monitoring device compatible with all PDFlo Flow Meters. The ideal measurement solution for liquid applications, from epoxy paints to brake fluid.
The PDFlo™ PDTX4 is a four-wire, meter mounted digital flow transmitter that is compatible with the PDFlo flow meter. A large, back-lighted LCD graphic display provides an easy to read indication of flow rate or total in user programmable engineering units. To change any key functions, simply use the magnet that is attached. No opening of the enclosure is required. To prevent the magnet from entering the programming mode inadvertently, an on board jumper controls ability to allow programming via external magnet. An isolated input also allows for remote rest of the totalizer. A 4-20 mA rate ouput with user programmable filtering and scaling is also provided for remote indication.
BENEFITS
User Friendly: A large, backlit LCD graphic display indicates flow rate or total in customer’s programmed engineering units
Measuring Range: Measure really low flow of high viscosity fluid due to the amplified digital hall effect sensor
Maximum Accuracy: Specifically calibrated for customer’s application
Maintenance-Free: Transmitter electronics completely isolated from process
Warranty: One-year warranty available
Specification Summary
Power Requirement: 15-24 VDC/150mA (customer supplied)
Sensor/Monitor Frequency Range: 0-4000 Hz
Analog Output: 4-20 mA
Enclosure Certifications: Class I, Groups B,C,D; Class II, Groups E,F,G; Class III; Atex: EEx d IIC, IP68; NEMA 4X, 7BCD, 9EFG
Compatible Products
PDSG1 Positive Displacement Spur Gear Flow Meter
| Installation Type | In line |
|---|---|
| Medium | Liquids |
| Product Type | Transmitters |
| Industries | Aerospace, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Iron, Steel & Metal, Life Sciences, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products |
| Part Number | PDTX4, PDTX4-A, PDTX4-C |
| Replaces Part Number | FCRT-Ex15A, FCRT-Ex15C |
Related products
MEMFlo™ MFAM Volumetric VA Flow Meter (DISCONTINUED)
CalFlo™ CFVF2 Thermal Mass Liquid Flow Meter
CalFlo™ CFHM Low Flow Thermal Mass Liquid Flow Meter
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.