The FLO-CORP PDFlo™ PDSG1 Positive Displacement Flow Meter can maintain consistent accuracy despite changing viscosity. The ideal solution for liquid applications, from hydraulic testing to fuel measurement.
PDFlo PDSG1 represents a positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter’s solid construction and excellent dynamic response are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, skydrol as well as other nonabrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flow meter, the PDFlo flow meters are simple to use and to install. The meters produce good resolution and high accuracy at low flow rates. Flow may be bidirectional without damage to internal parts. PDFlo Transmitters, panel displays and electronic modules can be added to complete this superior value package.
Optimized Performance: Maintains consistent performance even with changing viscosity conditions
Maximum Accuracy: Specifically calibrated for customer’s application – within 0.5% of reading
Easy Operation: No need for straight run piping upstream or downstream of the flow meter
Highly Adaptable:.003 GPM minimum flow for extremely low flow liquid applications
Durable: Variety of corrosive-resistant materials available
Warranty: One-year warranty available
Materials of Construction: Aluminum or stainless steel bodies; gears are stainless steel
Accuracy: +/-0.5% with over 10:1 turndown with 30cP fluid
Max Fluid Temperature: Meter 185°F Aluminum Body, Meter 400°F Stainless Body
PDTX4 Four-Wire Flow Transmitter/Monitor // PDTX3 Three-Wire Flow Transmitter/Monitor // PDTX2 Two-Wire Flow Transmitter/Monitor // PDSR1 & PDSR2 Spur Gear Sensor // PDFOP Fiber Optic Sensor
Aerospace, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Iron, Steel & Metal, Life Sciences, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products
The CALFLO™ CFSG3 flow and temperature thermal mass flow switch is a highly precise, compact industrial instrument. The CFSG3 works according to the calorimetric principle which is evaluated by using microprocessor technology.
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.