The FLO-CORP MEMFlo™ MFVC PVC and CPVC Volumetric VA Flow Meter is resistant to a variety of acids, alkalis, salts and corrosives – an excellent solution for water treatment plants, pickling lines, and deionized water applications.
Part Number: MFVC, MFVC-LCC-1712-TCV-N, MFVC-LCU-1712-TCV-N, MFVC-LPP-1712-TCV-N, MFVC-LCC-1006-TCV-N, MFVC-LCU-1006-TCV-N, MFVC-LPP-1006-TCV-N
Replaces Part Number: 12ACE___120_LV, 12ACU___120_LV, 12APP___120_LV, 6ACE___20_LV, 6ACU___20_LV, 6APP___20_LV
MEMFlo™ MFVC PVC & CPVC flow meters are simple, accurate variable area meters and resistant to many acids, alkalis, salt solutions, and other corrosives. These meters have an excellent tolerance to suspended solids and measure flow to one percent accuracy. Unlike tapered tube rotameters, the MEMFlo MFVC flow meters have an indicator disk in close proximity to the edge of the sight tube for visibility even in many dirty fluids. Alternatively, magnetic indication is available for accurate reading regardless of media. These meters can be supplied with the MFT2™ 2-Wire Transmitters for flow rate and total.
Durable: Rugged design with no springs, cams or seals to wear out
Saves Money: Time-tested design maximizes product life
Saves Time: Disassembles in less than a minute without removing the meter from the pipeline
Easy Installation: Requires no straight runs of pipe
Maximum Accuracy: Specifically calibrated for customer’s application
Warranty: Five-year warranty available
Pipe Sizes: 1/2″ – 4″
Flow Capacities: 0.54 thru 500 GPM liquids, 7.40 thru 5000 SCFM gases.
Max. Service Conditions: With socket connections, 265 to 300 psig @ 70°F depending on meter size. At 30 psig 210°F for CPVC models, 140°F for PVC units
Liquid & Gas
Chemical & Petrochemical, Environmental Water & Wastewater, Iron, Steel & Metal, Oil & Gas, Original Equipment Manufacturers, Pulp & Paper, Renewable Energy
MFVC, MFVC-LCC-1006-TCV-N, MFVC-LCC-1712-TCV-N, MFVC-LCU-1006-TCV-N, MFVC-LCU-1712-TCV-N, MFVC-LPP-1006-TCV-N, MFVC-LPP-1712-TCV-N
|Replaces Part Number||
12ACE___120_LV, 12ACU___120_LV, 12APP___120_LV, 6ACE___20_LV, 6ACU___20_LV, 6APP___20_LV
The CALFLO™ CFSG3 flow and temperature thermal mass flow switch is a highly precise, compact industrial instrument. The CFSG3 works according to the calorimetric principle which is evaluated by using microprocessor technology.Part Number: CFSG3 Replaces Part Number: CFSG
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.