The FLO-CORP CalFlo™ CFVF Thermal Mass Liquid Flow Meter has an adjustable measuring range, LED indication of flow, and is well suited for pipes up to 16” in diameter. The ideal solution for liquid applications, from sulfuric acid to potable water.
The CalFlo™ CFVF Thermal Mass Liquid Flow Meter is a great choice for a variety of measurement and control applications. Completely encapsulated in epoxy resin, the CFVF features solid-state sensing with proven reliability and long-term stability, even under the harshest environmental conditions. The CFVF has an adjustable measuring range, LED indication of flow, and is well-suited for pipes up to 16” in diameter. Typical applications include potable water, non-potable water, deionized water, sulfuric acid, light oil, and diluted corrosive liquids.
Low Maintenance: No moving parts to replace
Durable: Rugged stainless steel construction
Easy Installation: Minimum straight pipe required and standard NPT process connection
The FLO-CORP CalFlo™ CFHM Low Flow Thermal Mass Liquid Flow Meter is field adjustable and provides a 4-20mA output for flow rate. The ideal solution for low-flow liquid applications, from chemical dosing to food and beverage processing.
**DISCONTINUED** replacement is: CalFlo™ CFSG3 Flow and Temperature Thermal Mass Switch
The FLO-CORP CalFlo™ CFSG Flow and Temperature Thermal Mass Switch protects equipment and process from high temperatures and no-flow conditions. Precision monitoring for liquid applications, from deionized water to dry pump protection.
The FLO-CORP PDFlo™ PDSR1 Single Hall Effect Sensor detects the rotation of the PDFlo Flow Meter’s gears and emits a frequency signal proportional to flow. The ideal measurement solution for liquid applications, from fuel to polyurethane.
The FLO-CORP PDFlo™ PDFOP Fiber Optic sensors are designed to transmit a safe fiber optic signal, allowing the incorporation of PDFlo Flow Meters into fully charged electrostatic systems. The ideal solution for liquid monitoring, from electrostatic paint systems to applications with noise from VFDs.
The CALFLO™ CFSG3 flow and temperature thermal mass flow switch is a highly precise, compact industrial instrument. The CFSG3 works according to the calorimetric principle which is evaluated by using microprocessor technology.
The FLO-CORP MEMFlo™ MFTV Volumetric VA Flow Meter is the ideal solution for measuring liquid or gas applications, from vineyards to fracking sites.
Driver License Terms
The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software.
Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail).
The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT.
It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI.
The Software is provided "as is''.
There are no warranties (or similar) in relation to the quality of the Software.
There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data.
There is a monetary cap on FTDI's liability.
If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.