The FLO-CORP Vibex 2000™ LSV2 Vibrating Level Switch has the ability to detect bulk solids from 0.0007 lbs/in. Precision monitoring for solid applications, from fly ash to filtered sand.
The Vibex 2000™ vibrating level switch is an ideal instrument for accurate point level detection in solids. When the vibrating rod is immersed in the product, the vibration frequency change is detected by the integrated electronics module and converted into a switching command. If the vibrating rod is not covered by solids, its natural resonant frequency changes back and so does the state of the switching output. The ideal rod design ensures a reliable function in solid applications. Typical applications include bulk solids such as non-adhesive powders, plastic granules, pellets and fine-grained bulk solids.
Easy Installation: Standard 1″ NPT
Durable: Highly corrosion resistant 316 stainless steel
Low Maintenance: No moving parts to replace
Saves Money: Low cost of ownership
Reliable Performance: Adapts to changes in process
Warranty: Five-year warranty available
Process Temp.: -58 to 482ºF
Supply Voltage: 20-253VAC, 50/60Hz, 20-72vDC
Process Pressure: -14.5 PSIG to 232 PSIG
Process Fitting: Threaded 1″ NPT
Food & Beverage, Government Agencies, Iron, Steel & Metal, Minerals & Mining, Power & Energy
The FLO-CORP Ranger Two™ LTRP-2 Ultrasonic Level Transmitter (measurement up to 30ft.) is designed for level and distance measurement in remote monitoring and other difficult outdoor applications. Features include a stainless steel housing for rugged indoor or outdoor use, surge protection, and the ability to connect to one sensor up to 32 sensors optimized with RS-485 output to the CONNEX 3D Cellular Monitor.
THE CONNEX 3D™ QSR ASSET MONITORING SYSTEM provides the monitoring of any asset within the QSR facility including cooking oil management systems, freezer, cooler & refrigeration temperature, grill & ovens operation with remote cloud-based cellular connectivity.
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.