Product Information
THE CONNEX 3D™ QSR ASSET MONITORING SYSTEM provides the monitoring of any asset within the QSR facility including cooking oil management systems, freezer, cooler & refrigeration temperature, grill & ovens operation with remote cloud-based cellular connectivity.
The Food Safety Modernization Act (FSMA), signed into law on January 4, 2011 enables the Food and Drug Administration (FDA) to better protect public health by strengthening the food safety system. It allows FDA to focus more on preventing food safety problems, rather than reacting to problems after they occur. Meeting these food safety concerns requires better measurements and monitoring locally, in-store as well as remotely, at the management level. Anytime, anywhere. The CONNEX 3D™ is a cloud based monitoring system that measures and consolidates the data into usable and essential information for compliance reporting, management analytics, preventative maintenance, service provider efficiency and more.
The CONNEX 3D™ System takes the very best of process control and integrates it into a full-service monitor for the food service industry. A simple example of the CONNEX 3D™ system starts with fresh oil. Through level monitoring, every last drop of oil can be accounted for as the tank is filled with new product and as oil is added to the fryers. Because the quality of fried food is tied directly to the quality of the cooking oil, our system monitors the fryers to verify that oil has been filtered at the proper time and frequency. The temperature of the fryer is measured and monitored. The frequency of cooking oil replenishment is monitored all the way to the used oil tank. Finally, once used oil is stored for pickup, the system monitors the used oil tank so you know exactly how much oil you have added and exactly how much your vendor picks up. Vendors/Service Providers are connected to the system to know when to schedule service, pick up used cooking oil, and deliver new oil on demand. The CONNEX 3D™ monitor integrates any sensor into a remote measurement used for FDA compliance, food quality assurance, preventive maintenance and on-time service, environmental reporting and theft prevention.
The CONNEX 3D is the all-in-one solution. Local and remote monitoring of grill & oven operation provides added food quality assurance and faster on-time delivery of services, energy management, and QA management reporting of deliverables. Refrigerator and freezer temperatures as well as storage times for assets such as eggs or foods made with eggs can be measured and remotely monitored with the CONNEX 3D system.
Related products
MagFlo™ MMFM Magnetic Flow Meter
Digital Display Module (CDDM): CONNEX COMPATIBLE
The Digital Display Module for the CONNEX 3D™ Flexible Meter can be mounted remotely or integral (or both) to the CONNEX 3D™ process meter enclosure.
Power Supply Module (CPSM): CONNEX COMPATIBLE
The Power Supply Module for the CONNEX 3D™ Flexible Meter supplies a highly efficient regulator which generates the power conversion with lower heat dissipation that traditional power supplies.
Driver License Terms The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software. Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail). The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT. It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI. The Software is provided "as is''. There are no warranties (or similar) in relation to the quality of the Software. There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data. There is a monetary cap on FTDI's liability. If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.