The FLO-CORP CalFlo™ CFTM Thermal Mass Flow and Temperature Meter offers auto-self-calibration for reliable and repeatable results. The ideal solution for liquid applications, from condenser water to cooling flow.
The CalFlo™ CFTM Thermal Mass Flow and Temperature Meter represents the logical evolution matching modern microprocessor intelligence with over 30 years of thermal flow expertise. With its patent pending auto-self-calibration, the CalFlo™ CFTM is the first truly “set-it and forget-it” flow and temperature solution. No need for expensive on-going calibration as CFTM is designed to maintain accuracy for many years. With standard features such as highly accurate temperature sensing with auto-self-calibration, it becomes the most exciting flow sensor in decades. The Modbus version presents the user with analog flow and temperature, has a totalizing counter, and provides independent high and low adjustable flow and temperature switches. The analog version provides two independent linear 4-20mA outputs for both flow and temperature. A single potentiometer sets the flow range for analog versions.
Low Maintenance: No moving parts to replace
Easy Operation: Automatic self-calibration for quick start-up and commissioning
Highly Adaptable: Multiple measurements from one measurement point
Saves Money: Low cost of ownership
Easy Installation: Inserts in any line size using a standard 1/2″ NPT
Warranty: Five-year warranty available
Service: Oil or water-based solutions Repeatability: < 2% Process Temperature: -4ºF to 175ºF Pressure: Up to 1,400 PSI
Agriculture, Chemical & Petrochemical, Environmental Water & Wastewater, Government Agencies, Life Sciences, Minerals & Mining, Oil & Gas, Original Equipment Manufacturers, Power & Energy, Refined Products
The FLO-CORP CalFlo™ CFNF1 AC Thermal Mass Air Flow Switch uses solid-state switching for extremely reliable results, even in harsh environments. Precision monitoring for gas applications, from ventilation to damper regulators.
Part Number: CFNF1
The FLO-CORP CalFlo™ CFVF2 Thermal Mass Liquid Flow Meter is ideal for handling aggressive and hard to measure media. Precision measurement for liquid applications, from non-potable water to diluted corrosive liquids.
Part Number: CFVF2
The FLO-CORP MEMFlo™ MFAM Volumetric VA Flow Meter is the ideal measurement solution for high pressures, high temperatures, steam, dirty fluids, and harsh environments.
Part Numbers: MFAM, MFAM-LB-0906-TCB-N, MFAM-LB-0906-TCG-N, MFAM-LB-1712-TCB-N, MFAM-LB-1712-TCG-N, MFAM-LS-0906-TCB-N, MFAM-LS-0906-TCG-N, MFAM-LS-1712-TCB-N, MFAM-LS-1712-TCG-NReplaces Part Numbers: 6ABE__23CLB, 6ABE__23CLG, 12BSE__120CLB, 12ABE__120CLG, 6ASE__23CLB, 6ASE__23CLG, 12ASE__120CLB, 12ASE__120CLG
The FLO-CORP MAGFLO™ MMFM Magnetic Flow Meter is resistant to harsh chemicals and is available in flanged and wafer style. The ideal measurement solution for liquid applications, from waste treatment to pulp and paper.
Part Number: MMFM
The FLO-CORP ChannelFlo™ OCRM Guided Wave Radar Open Channel Flow Meter features time domain reflectometry (TDR) technology and provides continuous level measurement in liquids, solids, and slurries, from clarifier effluent to large rivers.
Part Number: OCRM
**DISCONTINUED** replacement is: CalFlo™ CFSG3 Flow and Temperature Thermal Mass Switch
The FLO-CORP CalFlo™ CFSG Flow and Temperature Thermal Mass Switch protects equipment and process from high temperatures and no-flow conditions. Precision monitoring for liquid applications, from deionized water to dry pump protection.
Part Number: CFSG is discontinued, replaced with: CFSG3
The UltraFlo™ UFD3 ultrasonic flow meter is a fixed or portable, clamp-on flow meter that is easy to install, accurate, and simple to use. The UltraFlo™ UFD3 ultrasonic flow meter is widely used in applications such as oil and gas, water treatment, pure water, chemical, and much more.
The FLO-CORP ChannelFlo™ UOCM Ultrasonic Open Channel Flow Meter's signal processing does not come in contact with the flow stream. The ideal measurement solution for liquid applications, from gravity fed sewer lines to storm water monitoring.
Part Number: UOCM
The FLO-CORP MEMFlo™ MFT2 two-wire in line flow transmitter accurately calculates and outputs flow rate. It is compatible and maximizes performance with all MEMFlo VA Flow Meters.
Part Numbers: MFT2, MFT2-01-N4, MFT2-01-N7, MFT2-02-N4, MFT2-02-N7Replaces Part Number: MFT-6-XP, MFT-6-N4, MFT-12-N4, MFT-12-XP
**DISCONTINUED** replacement is: CONNEX 3D™ Flexible Process Monitor
The FLO-CORP DigaCom 2000™ DCX2 Digital Process Meter is a field mount display that is ideal for a range of flow and level applications, from monitoring corn fields to fracking operations.
Part Number: DCX2
Driver License Terms
The software you can download from this web site ("the Software") is provided by Future Technology Devices International Limited ("FTDI") subject to the license terms set out at http://www.ftdichip.com/FTDriverLicenceTerms.htm ("the License Terms"). You must read the License Terms before downloading the Software. By installing or using the Software you agree to the License Terms. If you do not agree to the License Terms then do not download or use the Software.
Without prejudice to the License Terms, here is a summary of some of the key terms of the License Terms (and in the event of any conflict between this summary and the License Terms then the text of the License Terms will prevail).
The license only allows use of the Software with, and the Software will only work with Genuine FTDI Components (as defined in the License Terms). Use of the Software as a driver for a component that is not a Genuine FTDI Component MAY IRRETRIEVABLY DAMAGE THAT COMPONENT.
It is your responsibility to make sure that all chips you use the Software as a driver for are Genuine FTDI Components. If in doubt then contact FTDI.
The Software is provided "as is''.
There are no warranties (or similar) in relation to the quality of the Software.
There are exclusions of FTDI liability for certain types of loss such as: special loss or damage; incidental loss or damage; indirect or consequential loss or damage; loss of income; loss of business; loss of profits; loss of revenue; loss of contracts; business interruption; loss of the use of money or anticipated savings; loss of information; loss of opportunity; loss of goodwill or reputation; and/or loss of, damage to or corruption of data.
There is a monetary cap on FTDI's liability.
If a custom vendor ID and/or product ID or description string are used, it is the responsibility of the product manufacturer to maintain any changes and subsequent WHQL re-certification as a result of making these changes.