Ultrasonic Level Transmitters
 |
Description |
Specification |
|
EchoPod is a general purpose, ultrasonic sensor that provides non-contact level measurement up to 49.2” (1.25m) with a 4-20 mA output. EchoPod directly replaces contact measurement sensors connected to a PLC analog input card for easy design conversion or field retrofit. |
Range: 2" to 49.2" (1.25m) |
|
 |
Description |
Specification |
|
EchoPod is a general purpose non-contact ultrasonic level switch, controller and transmitter for small tanks 49.2" (1.25 m) or less. It is well suited for corrosive and dirty applications with its non-metallic housing and transducer. |
Range: 49.2" (1.25m) |
|
 |
Description |
Specification |
|
EchoPod is a general purpose non-contact ultrasonic level switch, controller and transmitter for tanks or vessels 9 feet or less. Maintenance free, the EchoPod reduces tank system hardware through simplicity and consolidation. It is well suited for corrosive and dirty applications with its non-metallic housing and transducer. |
Range: 98.4" (2.5m) |
|
 |
Description |
Specification |
|
EchoSafe is an explosion proof, two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8 feet (10 meters) in hazardous bulk storage, day tank and sump applications, and is well suited for challenging corrosive, slurry or waste media. A narrow, 3" beam diameter enables flexible installations. |
Range: XP88 8" tp 24.6' (20 cm to 7.5 m)XP89 8" to 32.8' (20 cm to 10 m) |
|
 |
Description |
Specification |
|
EchoSpan is the advanced non-contact level measurement solution for atmospheric storage tanks up to 32' (10m) including bulk storage, day tank and waste sump applications. Calibration is fast and simple with our scrolling single layer menu, three button interface and 6-segment LCD display. Its full featured level made simple. |
Range: 4" to 32.8' (10cm to 10m) |
|
 |
Description |
Specification |
|
EchoSonic redefines non-contact level measurement size and simplicity for atmospheric bulk storage, day tank and waste sump applications up to 26' (8m). From acid to water, wastewater to diesel, EchoSonic does it all. The compact transmitter is offered in both IP65 and IP67 enclosures for maximum flexibility. |
Range: 2" to 26.2' (5cm to 8m) |
|
|
EchoSonic II™, Second Generation Two-Wire Ultrasonic Level Transmitter |
||
 |
Description |
Specification |
|
The new EchoSonic II provides non-contact level measurement up to 32.8' (10 m), and is well suited for challenging ultrapure, corrosive, slurry or waste liquids. Used for atmospheric bulk storage, day tank, waste sump, process vessel, IBC tote, 55-gallon drum and waste sump applications. Media examples include acetic acid and resin. |
Range: 4 to 8.2' (10 cm to 2.5 m), or 8 to 24.6' (20 cm to 7.5 m), or |
|
 |
Description |
Specification |
|
CSA approved intrinsically safe for use in hazardous zones, the non-contact level transmitter is ideal for atmospheric bulk storage, day tank and waste sump applications up to 18' (5.4m). Compact and rugged, the push button calibrated transmitter is reliable and easy to configure. Its hazardous level made simple. |
Range: 6" to 18' (15cm to 5.4m) |
|
 |
Description |
Specification |
|
Echotouch provides non-contact level measurement of atmospheric bulk storage tanks up to 24.5' (7.4m) with an integral relay for alarm or automatic fill or empty control. Compact and rugged, the push button calibrated transmitter is reliable and easy to configure. Its level measurement and control made simple. |
Range: 6" to 24.5' (15cm to 7.4m) |
|
 |
Description |
Specification |
|
The general purpose two-wire pressure transmitter is offered in two termination packages and provides contact level measurement up to 69' or 21.1m of water column. The transmitter is best applied with clean liquid or gas media including water, oil and air. |
Range: 0 psi (0 bar) - 30 psi (2 bar) |
|
 |
Description |
Specification |
|
The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46' or 14m of water column. Select the LD31 for clean or relatively clean water, light weight oils and diluted chemical media. Application examples include ground water, ponds and wells. Select the LD32 for dirty, sludge or slurry media. Application examples include sewer or storm pump lift stations, storage and treatment with surface foam or debris where ultrasonic cannot be applied. |
Range: 0 psi (0 bar) - 20 psi (1.38 bar) |
|
 |
Description |
Specification |
The general purpose two-wire float transmitter provides contact level measurement up to 8' or 2.4m, and is ideally suited for relatively clean water, light oil or diluted corrosive liquids. The transmitter is typically selected for high temperature and/or pressure process tank applications. Media examples include boiler water and cooking oil. |
Range: 6" to 96" |
|
