UltraFlo Ultrasonic Flow Meters

Flo-Corp offers both UltraFlo transit time meters for clean liquids, and doppler units for liquids with suspended solids. A clamp-on model with integral display is also now offered. Ultrasonic transit time flow meters feature the world's most advanced non-invasive flow measurement technology available, providing a measuring system with unsurpassed accuracy, versatility, low-cost of installation and low-cost of ownership. Full-pipe, bi-directional, liquid flows up to 40 FPS can be measured in pipe sizes from 1" to 100". Our ultrasonic doppler meters are ideal for sewage, sludge, slurries, and other fluids with suspended solids or high aeration.

Portable, Transit Time, Ultrasonic Flow Meters (FCXP)
	Description	Specification
	UltraFlo Portable Transit Time Flow Meters are designed for long- or short-term measurement flow surveys on full-pipe liquid systems and are ideal for verifying calibration of permanently mounted flow meters of all types. Although intended primarily for cleaner liquids, the flow meter operates reliably with greater amounts of suspended solids or aeration than previous transit time ultrasonic flow meters were capable of measuring.	Power Requirements: Internal 12 V lead-acid Gel Cell bettery provides 24 hrs of continuous operation @ 20°C. Outputs: Standard 4-20 mA; optional pulse. Data Logger: 200,000-event, 16-bit, integral DB-9 RS232C connection.. Display: 128 x 64 pixel graphics LCD, LED back lit. Two user selectable font sized 0.35" [8.9mm] or 0.2"[5.0 mm] 8 digit rate, 8 digit totalizer (resettable)
Dedicated Transit Time Flow Meters (FCXL)
	Description	Specification
	Series FCXL UltraFlo flow meters clamp onto the outside of existing pipe and do not contact the internal liquid. This advanced product provides instantaneous rate and accumulated flows along with 4-20mA and pulse outputs.	Power Requirements: 11-30 VDC @ 0.25A Outputs: Standard 4-20 mA Display: Type 2 line x 8 character LCD; top row: 0.7" [18mm] tall, 7-segment; Bottom row: 0.35" [9mm] tall, 14-segment none; Rate 8 maximum rate digits, lead zero blanking; Total 8 maximum totalizer digits
Dedicated Transit Time Plus Flow Meters (FCXD)
	Description	Specification
	Transit Time Flow Meters provide a measuring system with unsurpassed accuracy, versatility, low cost of installation and low cost of ownership. The FCXD system installs quickly onto liquid piping systems with its non-invasive, non-fouling transducers and can be configured and operational within minutes. FCXD is designed for fixed-location installation on liquid systems and is available in both blind (FCXD1) and display (FCXD2) models.	Power Requirements: (Std) 10-28 VDC @ 0.25 VA max; 115/230 VAC, 50/60 Hz ± 15% @ 5 VA max Outputs: 4-20 mA, relay or pulse options Display (FCXD2 only): 2 line x 8 character, LCD, back lit. Top row: 7-segment digit height, 0.7 inches [18 mm]; Bottom row: 14-segment digit height 0.35 inches [9 mm]; 8 digit rate, 8 digit totalizer (resettable)
Digital Doppler Flow Meters (FCDDX)
	Description	Specification
	Series FCDDX Ultrasonic Digital Doppler Flow Meters measure flow of liquids that contain useful sonic reflectors suspended within the liquid. The Series FCDDX replaces the obsolete velocity sensors by using more advanced technology for easier installation and more reliable readings on a wide range of liquid and reflector conditions. Unlike other Doppler technologies, the Series FCDDX is relatively insensitive to VFDs and other ultrasonic noises.	Power Requirements: 115/230 VAC 50/60 Hz ± 15% @ 5 VA, Max; 12-28 VDC @ 2.5 VA Max. Outputs: 4-20 mA, dual relay, or pulse options Display: 2 line x 8 character LCD; LED backlighting; Top row 7-segment 0.7 inch (18 mm); bottom row 14-segment 0.35 inch (9 mm); 8-digit rate 8-digit total (resettable)